Negotiable
The date of payment from buyers deliver within days
Guangdong
Long-term effective
2017-08-16 11:22
877
Company Profile
ByTune Electronics Co.,LtdBy certification [File Integrity]
Contact: beitong(Mr.)
Email:
Telephone:
Phone:
Area: Guangdong
Address: Guangdong
Website: http://www.btslipring.com/ http://beitong.szjinxiongjixie.com/
Wind Turbine Slip Ring with SGS/CE/FCC/ROHS
As the name , we could see a wind turbine slip ring is a slip ring for wind turbine application! As the wind energy industry has grown over the last decade, so has turbine slip ring technology.
Although these devices are small, their importance should not be undervalued. Wind turbines require reliable transmission of power and data signals from the nacelle to the control system for the rotary blades, and this is where slip rings come into play.
In a turbine, the electrical connection to the rotor is made by connections to the brushes.
This is accomplished by either:
1.Holding the center core stationary while a slip ring's brushes and housing rotate around it.
2.Holding the brushes and housing stationary while the center core is allowed to rotate. system operation and eliminate damage-prone wires dangling from movable joints.
Wind turbine slip ring is necessary for wind energy, this slip ring can transfer power and signal, also can add control system, but the maintenance cost is very high, so development a high performance slip ring is essential. The most critical time to perform reliability tests on slip-ring assemblies is before they leave the factory. This is especially true when it is not feasible to perform a complete testing procedure on a product once installed up-tower. Analysis should consist of at least three tests: isolation, continuity, and high-voltage potential test for power circuits.
Parameters: Wind Turbine Slip Ring with SGS/CE/FCC/ROHS
Mechanical :
Working speed |
As per requested |
Operating temperature |
-40℃~ +100℃ |
Contact material |
Precious metal |
IP Grade |
IP54 |
Electrical:
Circuit |
As per requested , normally less than 6 |
Current |
2A, 5A, 10,15A,20A,30A optional |
Signal |
As per requested |
Voltage |
≤380V, 600V optional |
Dielectric strength |
≥1000V@50Hz between each circuit |
Insulation resistance |
1000MΩ@ 500VDC |
Electric noise |
≤7mΩ |
Lead wire size |
As per requested Wire or Metal Pin |
Lead wire length |
Standard in 300mm |
Features of Wind Turbine Slip Ring with SGS/CE/FCC/ROHS : Wind Turbine Slip Ring with SGS/CE/FCC/ROHS
●Contact smooth
●Transfer power or data reliable
●Robust
●Water and dust proof
●Workable in hostile environment(-40℃~ +100℃)
Alternatives of Wind Turbine Slip Ring with SGS/CE/FCC/ROHS:
●Circuits
●Loading of each circuit
●Wire length
●Inner hole /outer hole diameter or length
●Material of contacting
●Housing material or color
Measurement and Test:
3D Test Concentricity Test
Electric noise Test Projecto
Interference test Reliable contact Test